David Cappello (KG5EIU)

Adventures And Interests


Ham Radio

Building A 50Ah LiFePO4 Battery Box

Build notes on a light-weight portable 12v 50Ah LiFePO4 battery in a pelican laptop case for HAM radio and other uses – great for POTA and SOTA trips. Features include an AMP meter/gauge, main battery disconnect, dual Anderson Power Pole ports, PD/USB-C and USB QC 3.0 charge ports all housed in a lightweight easy to carry laptop case.

Continue reading “Building A 50Ah LiFePO4 Battery Box”

Building A HAM Radio GoBox

Operating HAM Radio GoBox From Local Park

Short slide deck and some notes on building a dual radio HAM radio gobox for Emcom use, Parks On the Air (POTA), ARRL Field Day and other HAM Radio events. Presented at the Dallas Amateur Radio Club Oct 2021 member meeting.

Continue reading “Building A HAM Radio GoBox”

Setting Up A GL-USB150 With AREDN

GL-USB150 Microuter

Installing and setting up AREDN (Amateur Radio Emergency Data Network) firmware on a GL-iNet GL-USB150 Microuter is simple an easy with just a few short steps to get this node on the air in an AREDN Network. Be sure to review the excellent AREDN Doc on getting started – will be using the GL-iNet First Install Process as a reference to get the AREDN firmware loaded on the GL-USB150 Microuter. The main use case will be have any computer with a USB port get instant access to an AREDN mesh network – you only need to be near another mesh node for it to connect. The GL-USB150 running the AREDN firmware can also act as an AREDN Tunnel Node or an AREDN Tunnel End Point.

Continue reading “Setting Up A GL-USB150 With AREDN”

VHF WinLink With IC-705 And Soundmodem TNC

WinLink VHF with Soundmodem

VHF Winlink is working good with the new Icom IC-705 and UZ7HO Soundmodem 1.05 software TNC using the optional CAT control files from the Icom IC-7300

Continue reading “VHF WinLink With IC-705 And Soundmodem TNC”

Using WinLink With Icom IC-9700 And Soundmodem TNC

Icom IC-9700 In FM-D mode for Winlink Express
Continue reading “Using WinLink With Icom IC-9700 And Soundmodem TNC”

Picture Mode IC-9700

Short YouTube video showing you how to get into picture mode on the Icom IC-9700 HAM Radio using the new firmware v1.20 release early Oct 2019.

Continue reading “Picture Mode IC-9700”

Getting Started With Wires-X

A Very short overview of setting up a Yaesu Wires-X node – as presented at the Dallas Amateur Radio Club Tech Net On The Hill Sat Oct 19, 2019

Continue reading “Getting Started With Wires-X”

Icom IC-9700 Internal Terminal Mode

IC-9700 In Internal Terminal Mode

Using the new Icom IC-9700 in D-Star DV Internal Terminal mode and connecting to the multi-protocol XLX227 B reflector. Radio is running the latest firmware as of June 29, 2019 ver 1.11

Continue reading “Icom IC-9700 Internal Terminal Mode”

Icom 9700 Terminal Mode With PiStar

Icom 9700 In External Terminal Mode

Using the new Icom IC-9700 in DV terminal mode with the new beta version of Pi-Star 4.0 RC4 running on a Raspberry Pi for D-Star.

Continue reading “Icom 9700 Terminal Mode With PiStar”

Blog at

Up ↑

%d bloggers like this: